COMBI MACBERTIN is a paint that creates the texture of natural Italian marble. It is composed of special Acrylic Resin and marble mineral particles and shows great weather-resistance, durability, and especially contamination resistance. It is also easy to clean, it actually creates a texture of Italian marble and it is an Eco-friendly product that is low in VOCs and contains no HCHO, which is the basic requirement for interior paints.COMBI TRAVERTINE is a paint that creates the texture of natural Italian marble. It is composed of special Acrylic Resin and marble mineral particles and shows great weather-resistance, durability, and especially contamination-resistance. It is also easy to clean. It is very similar to MACBERTINE, which is a type of Italian marble, and suitable for creating the texture of marble. It is an Eco-friendly product that is low in VOCs and contains no HCHO, which is the basic requirements for interior paints, and has been certified by the Eco-friendly Mark Association.

General Use

1. Interior walls of any type of buildings, i.e., concrete, cement mortar, plaster board, plywood, PC board, ALC board, GRC board etc.
2. Artistic spaces: Exhibition halls, multi-purpose halls, galleries, concert halls, etc.
3. Public places: Wedding halls, libraries, churches, schools, public buildings, etc.
4. Commercial places: Cafes, hotels, condominiums, entertainment venues, etc

Process	Material	Mixing (Ratio)	Amount (kg/m2)	No. of coats	Within Process	Between Process	Final Curing	Method
Surface preparation/inspection	Impurities on the surface should be completely removedUse putty to flatten grooves, cracks, and damages.
Undercoat	Combi Primer Water	100 5% or lower	0.15-0.2	1-2	-	4 or longer	-	Brush, Roller, Spray
Joints	Drawing Line joints	Design the position of joints and draw a line with ink or chalk. Apply tape joints along the design.
Lining	Combi MC BERTIN Combi Texture Topcoat Water	100 100 5% or lower	2.5-3.0 0.1-0.2	1 1	- -	- -	- 24 or longer	Spray Spray
Patterning	Start Patterning.
Polishing	1st Polishing 2st Polishing	Polish the surface evenly.						Sandpaper #120 Sandpaper #320
Topcoat	Combi Diato Mild Top	100 5% or lower	0.15-0.2	1-2	-	-	24 or longer	Brush, Roller, Spray

1. The weather condition should be 5°C or higher in temperature, 85% or lower in relative humidity, and 5m/sec or lower in wind velocity with no rainfall or snowfall.
2. Dry for sufficient length of time (10% or lower water content; pH9 or lower).
3. Must not have dust, grease, or impurities.
4. Must not have cracks, grooves, or damages.
5. Must not have pinholes or blowholes

Process	Material	Mixing (Ratio)	Amount (kg/m2)	No. of coats	Within Process	Between Process	Final Curing	Method
Surface preparation/inspection	Impurities on the surface should be completely removedUse putty to flatten grooves, cracks, and damages.
Undercoat	Combi Primer Water	100 5% or lower	0.15-0.2	1-2	-	4 or longer	-	Brush, Roller, Spray
Joints	Drawing Line joints	Design the position of joints and draw a line with ink or chalk. Apply tape joints along the design.
Lining	Combi Travertine Under Lining Water Combi Travertine Lining Water	100 5% or lower 100 5% or lower	2-2.5 0.4-0.5	1 1	- -	- 24 or longer	Spray Spray
Polishing	1st Polishing 2st Polishing	Polish the surface evenly.						Sandpaper #80-#120 Sandpaper #320
Topcoat	Combi Diato Mild Top	100 5% or lower	0.15-0.2	1-2	-	-	24 or longer	Brush, Roller, Spray