Combi Stone is a stone-based spray paint taht uses special acrylic resin emulsion and natural quartz stone. It is interior/exterior spray finish that creates the embossed appearance of natural stone and offers a good adhesion, water resistance, durability, and discoloration-resistance.

General Use

1. Special applications on apartments (lower floors below 4, pilotis, canopies, etc)
2. Exterior walls and special applications on buildings and multifamily houses
3. Interior or exterior walls of any type of buildings, i.e. , concrete, plaster board, plywood, PC Board, ALC Board, GRC Board, retaining walls, etc.

1. The weather condition should be 5°C or higher in temperature, 85% or lower in relative humidity, and 5m/sec or lower in wind velocity with no rainfall or snowfall.
2. Dry for sufficient length of time (10% or lower water content; ph9 or lower).
3. Must not have dust, grease, or impurities.
4. Must not have cracks, grooves, or damages.
5. Must not have pinholes or blowholes.

Process	Material	Mixing (Ratio)	Amount (kg/m2)	No. of coats	Within Process	Between Process	Final Curing	Method
Surface preparation/inspection	Impurities on the surface should be completely removedUse putty flatten grooves, cracks, and damages.
Undercoat	Combi Primer Water	100 5% or lower	0.15-0.2	1-2	-	4 or longer	-	Brush, Roller
Joints	Drawing Line joints	Design the position of joints and draw a line with ink or chalk. Attach caulking material along joints and remove joint cover after lining.
Lining	Combi Stone Water	100 5% or lower	4-5	1-2	-	4 or longer	24 or longer	Spray
Topcoat	Combi AS#300 Water	100 5% or lower	0.15-0.2	1-2	-	4 or longer	24 or longer	Brush, Roller, Spray